Envo Sense

Envo Sense are our proprietary sensors that give you insights where you would otherwise lack data.

Envo Sense are problem solvers that provide wireless monitoring with robust and precise communication

In most cases, existing systems are integrated into Envo’s solutions, but sometimes additional sensors are needed.

That’s why we developed Envo Sense: a range of wireless products used as sensors and problem-solvers, with flexible and robust communication for easy installation.

The various sensors in the Envo Sense family are used as a source to provide a quick overview. The system issues alerts in case of incorrect temperature, excessive humidity, or too high a CO2 level in the building. The products are a family of industry-specified wireless devices that use the robust ZigBee® Mesh standard for secure, encrypted wireless communication.

Wireless sensors provide easy installation.

Sensors

Measures temperature with a built-in temperature sensor.

IP rating:IP44

Battery-powered temperature sensor that requires minimal installation. This solution can be mounted directly in the environment where measurements are to be taken, without external probes or power supply. The battery life is 3–5 years.

Typical use:
Installed in refrigerators, cold rooms, freezer counters, etc.

Measures temperature with 8x digital external probes.

IP rating:IP20

Usually participates in the Mesh network as a “Router” and strengthens the network for all other devices. Can also be configured in battery mode with somewhat reduced functionality.

Typical use:
Installed close to where the temperature is to be measured. Up to 8 external probes are connected in a bus topology and placed where the measurements are to be taken.

Measures temperature with 1x PT100 RTD external precision probe.

IP rating:IP20

Usually participates in the Mesh network as a “Router” and strengthens the network for all other devices. Can also be configured in battery mode with somewhat reduced functionality.

Typical use:
Precision measurement and/or measurement in particularly cold or hot locations (supports -200°C to 320°C). Often used for environmental monitoring in ultra-low temperature freezers in laboratories.

This product makes sensors, controllers, etc. wireless.

IP rating:IP20

The product has an RS-485 interface and supports the Modbus RTU protocol for communication with external equipment. It is available over the secure mesh network and can be controlled as if it were directly wired.

Typical use:

  1. Wireless control and monitoring of plug-in cabinets. Remote control of the controller in the cabinet, all parameters. Move the refrigerated and freezer cabinets without changing the installation.
  2. Simple wireless integration of third-party precision sensors and similar devices with an RS-485 interface and Modbus RTU protocol. Wide selection of sensors, choose from the best suppliers of probes and environmental sensors.

With robust communication and precise measurement of temperature, humidity, and CO2 levels, Envo Sense helps you maintain full control of indoor climate, refrigeration, and freezing.

Industry solutions from Envo

Commercial buildingsFood & process industryGroceries & HorecaHospitals & laboratories