Skip to content
Wireless monitoring.

Envo Sense

Wireless monitoring.
In most cases, existing systems will be integrated in Envo’s solutions, but additional sensors are sometimes required. This is why we have developed Envo Sense, a range of wireless products used as sensors and troubleshooters with flexible and resilient communication for easy installation.
Add a button link here
  • Proprietary product range
  • Wireless collection of data
  • Extremely simple installation
Resilient and precise communication

The products consist of a range of industry-specific wireless products using the resilient ZigBee®Mesh standard for secure, encrypted wireless communication.

The different sensors in the Envo Sense range are used as a source for obtaining a quick overview of the quality of the indoor climate thanks to the precise temperature, humidity and CO2 level readings. The system will issue alerts in the event of incorrect temperatures or excessive humidity or CO2 levels in the building.

Add a button link here
Envo_sense_10210-2

EP10210

Measures the temperature using a built-in temperature sensor.

IP rating: IP44

Battery-powered temperature sensor requiring minimal installation. This solution can be installed directly in the environment in which measurements need to be taken without any external probes or power supply. The battery has a service life of 3-5 years.

Typical usage cases:

Installed in refrigerators, cold rooms, frozen counters, etc.

Envo_sense_10211

EP10211

Measures temperature using 8 x digital external probes.

IP rating: IP20

Usually participates in the Mesh network as a “router” and amplifies the network for all other devices. Can also be configured in battery mode with somewhat reduced functionality.

Typical usage cases:

Installed in close proximity to where the temperature will be measured. Up to 8 x external probes can be connected to bus topology and placed where measurements need to be taken.

Envo_sense_10212

EP10212

Measures temperature using 1 x PT100 RTD external precision probe.

IP rating: IP20

Usually participates in the Mesh network as a “router” and amplifies the network for all other devices. Can also be configured in battery mode with somewhat reduced functionality.

Typical usage cases:

Precision measurements and/or measurements in particularly cold or warm locations (supports temperatures between -200C and 320C). Often used for environmental measurement in ultra-cold storage freezers in laboratories.

Envo_sense_10213

EP10213

This product makes sensors, controllers, etc. wireless.

IP rating: IP20

The product has an RS-485 interface and supports the Modbus RTU protocol for external devices. Available over the secure mesh network and can be managed as though it was wired directly.

Typical usage cases:

  • Wireless management and monitoring of plug-in counters. Remote management of regulators in counters, all parameters. Move refrigerated and frozen counters without changing the installation.
  • Easy wireless integration of third-party precision sensors, etc. with RS-485 interface and Modbus RTU protocol. Extensive range of sensors, choose from the best suppliers of probes and environmental sensors.

Interested in learning more about Envo Sense?

Please do not hesitate to provide your contact details so that we can get in touch for a chat!